405.7 – Landings

405.7 Landings.
Ramps shall have landings at the top and the bottom of each ramp run.  Landings shall comply with 405.7.

405.7.1 Slope.
Landings shall comply with 302.  Changes in level are not permitted.

405.7.2 Width.
The landing clear width shall be at least as wide as the widest ramp run leading to the landing.

405.7.3 Length.
The landing clear length shall be 1525 mm (60″) long minimum.

405.7.4 Change in Direction.
Ramps that change direction between runs at landings shall have a clear landing 1525 mm (60″) minimum by 1525 mm (60″) minimum.

405.7.5 Doorways.
Where doorways are located adjacent to a ramp landing, maneuvering clearances required by 404.2.4 and 404.3.2 shall be permitted to overlap the required landing area.