406.2 – Counter Slope
Project Type: Office
This is the Office project type.
406 – Curb Ramps Quick Guide
403.2-4 – Surfaces + Level Changes
403 – Corridor Quick Guide
404.2.11 – Vision Lights
404.2.10 – Surfaces
404.2.10 Door and Gate Surfaces. Swinging door and gate surfaces within 255 mm (10″) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door or gate. Parts creating horizontal or vertical joints in these surfaces shall be within 1.6 mm (1/16″)
404.2.8+9 – Opening/Closing
404.2.7 – Hardware
404.2.6 – Doors in Series
404.2.5 – Thresholds
403 Walking Surfaces 403.2 Floor or Ground Surface. Floor or ground surfaces shall comply with 302. 403.3 Slope. The running slope of walking surfaces shall not be steeper than 1:20. The cross slope of walking surfaces shall not be steeper than 1:48. 403.4 Changes in Level. Changes in level shall comply with 303. 403.5 Clearances.