406 – Curb Ramps Quick Guide
Scoping Chapter: F206 – Accessible Routes
403.2-4 – Surfaces + Level Changes
403 – Corridor Quick Guide
404.2.11 – Vision Lights
404.2.10 – Surfaces
404.2.10 Door and Gate Surfaces. Swinging door and gate surfaces within 255 mm (10″) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door or gate. Parts creating horizontal or vertical joints in these surfaces shall be within 1.6 mm (1/16″)
404.2.8+9 – Opening/Closing
404.2.7 – Hardware
404.2.6 – Doors in Series
404.2.5 – Thresholds
403 Walking Surfaces 403.2 Floor or Ground Surface. Floor or ground surfaces shall comply with 302. 403.3 Slope. The running slope of walking surfaces shall not be steeper than 1:20. The cross slope of walking surfaces shall not be steeper than 1:48. 403.4 Changes in Level. Changes in level shall comply with 303. 403.5 Clearances.
404.2.4.3 – Recessed Doors
403 Walking Surfaces 403.2 Floor or Ground Surface. Floor or ground surfaces shall comply with 302. 403.3 Slope. The running slope of walking surfaces shall not be steeper than 1:20. The cross slope of walking surfaces shall not be steeper than 1:48. 403.4 Changes in Level. Changes in level shall comply with 303. 403.5 Clearances.