404.3 Automatic and Power-Assisted Doors and Gates. Automatic doors and automatic gates shall comply with 404.3. Full-powered automatic doors shall comply with ANSI/BHMA A156.10 (incorporated by reference, see “Referenced Standards” in Chapter 1). Low-energy and power-assisted doors shall comply with ANSI/BHMA A156.19 (1997 or 2002 edition) (incorporated by reference, see “Referenced Standards” in Chapter 1).
Project Type: Site/CMPD
This is the Site/CMPD project category.
F206 – Accessible Routes
F206.1 General – Accessible routes shall be provided in accordance with F206 and shall comply with Chapter 4 except that the exemptions at 403.5, 405.5, and 405.8 shall not apply. EXCEPTIONS: 1. Accessible routes shall not be required where outdoor recreation access routes are provided at picnic facilities in accordance with F245.4, viewing areas in
F203 – General Exceptions
F203.1 General – Sites, buildings, facilities, and elements are exempt from these requirements to the extent specified by F203. OBO Clarification: Exceptions are limited to those listed in the guidelines and those listed below when conditions are met. Buildings containing only shops and no office space are not required to be accessible. Buildings containing only mechanical
F202 – Existing Buildings and Facilities
F202.1 General – Additions and alterations to existing buildings or facilities, including leased buildings or facilities, shall comply with F202. F202.2 Additions – Each addition to an existing building or facility shall comply with the requirements for new construction. F202.2.1 Accessible Route – At least one accessible route shall be provided within the site from accessible parking spaces and accessible passenger loading zones; public streets and sidewalks;
F201 – Application
F201.1 Scope – All areas of newly designed and newly constructed buildings and facilities and altered or leased portions of existing buildings and facilities shall comply with these requirements. F201.2 Application Based on Building or Facility Use – Where a site, building, facility, room, or space contains more than one use, each portion shall comply